The Basics
step 2: power your scanner
You can power your scanner from a wall outlet,
through your vehicle's ignition, or from your vehicle's
cigarette lighter.
from a wall outlet
1. Connect the tip of the supplied AC adapter to the
DC 13.8V jack at the rear of your scanner.
2. Plug the AC adapter into your wall outlet.
You must use a Class 2 power source that supplies
Note
Note
13.8V DC and delivers at least 600mA. Its center
tip must be set to positive and its plug must fi t the
scanner's
not meet these specifi cations could damage the
scanner or the adapter.
To prevent electric shock, do not use the AC
Warning!
Warning!
adapter's polarized plug with an extension cord,
receptacle, or other outlet unless you can fully
insert the blades to prevent blade exposure.
DC 13.8V
jack. Using an adapter that does
14