Radio Shack PRO-2055 User Manual page 72

Beyond the Basics
order. For example, home repeater order 1 would
go into channel 01 for the current bank, and home
repeater order 2 would go into channel 02.
Follow these steps to program trunked frequencies:
1. Press
To move through the bank selection faster, press
Note Note
PROG
through the banks one at a time, repeat the
sequence of
the desired bank.
2. Press TRUNK to enter the ID program mode.
3. Repeatedly press MODE to select Motorola, EDACS
(GE/Ericsson), or LTR (EF Johnson) system to scan.
This sets the talk group ID decoding method to be
used for the bank.
If you select conventional mode instead of
Note Note
Motorola, EDACS, or LTR, the scanner does not
scan trunked frequencies. Trunking mode not
selected, press Mode key. appears.
and select the bank.
PROG
FUNC
then and hold down
PROG, FUNC
e
then e or
72
or . To move
d
d until you reach