Pentair FLECK 5800 XTR2 Service Manual page 11

TOUCHSCREEN CONTROL FEATURES
continued
The Password screen displays a numeric keypad.
Figure 16 Password Screen
• Enter the master settings password 1201 and press
continue to the main Master Settings screen, or press
to return to the Home screen.
After entering the correct password and pressing
Master Settings screen is displayed.
Figure 17 Main Master Settings Screen
While in the Master Settings screens, press
set parameters to a custom profile (see "NON-FACTORY
SETTINGS" on page 15) or press the Home button
return to the Home screen.
Features of the Master Settings screens are described
below. See MASTER SETTINGS PROGRAMMING and MASTER
SETTINGS REFERENCE CHART for more detailed information.
• format: Contains settings for Language, Units, Hardness
Units, Assistance Name, Assistance Phone, and
Assistance Interval. See TOUCHSCREEN CONTROL QUICK
START for more information about these settings.
• valve: Contains settings for System, Valve, and
Regeneration Type.
• regen: Contains settings for Regen Flow.
• relay: Contains settings for Aux 1 and Aux 2 relays.
• meter: (time clock systems) Contains settings for Meter
Types, emergency regeneration.
• settings review: Displays a summary of all programmed
settings.
Press the screen navigation arrow at the top right of the screen
to navigate to the secondary Master Settings screen.
• water saver regen: Contains settings for setting
to
regenerations to save water by reducing backwash and
rinse time on a particular interval
• remote regen: Contains settings for triggering a
, the main
regeneration via a remote input
• cl generation/low salt: (international version only)
Contains settings to trigger chlorine generator for the
control
Water Saver Regeneration
From the secondary Master Settings screen (Figure 18) press
the water saver regen. button to display the Water Saver
Regen screen (Figure 19).
to save all
to
• water saver regen: reduces backwash and rapid rinse
times on a particular interval. The reduced backwash
time is 50% less than the backwash time (rounded down
to the nearest minute, e.g. if the backwash time is set to
10 minutes, enabling the water saver regen function will
reduce the backwash time to 5 minutes).The reduced
rapid rinse time is 66% less than the rapid rinse time
(rounded down to the nearest minute, e.g. if the rapid
rinse time is set to 10 minutes, enabling the water
saver regen function will reduce the backwash time to 3
minutes).
• range: 1-25 regenerations (for example, a setting of 3
will produce 1 normal regeneration then 3 reduced water
saving regenerations).
Figure 18 Secondary Master Settings Screen
Figure 19 Water Saver Regen Screen
FLECK 5800 XTR2 Service Manual • 11