To Arc Tv - Onkyo TX-RZ830 Instruction Manual

To ARC TV

a
a HDMI cable
Contents Connections
≫
If the TV supports the ARC (Audio Return Channel) function (*), use only the
HDMI cable to connect with the TV. Use the ARC-compatible HDMI IN jack of the
TV for connection.
• Another TV or projector can be connected to the HDMI OUT SUB jack. To
switch between MAIN and SUB, press the Q button (
controller, and select "Other" - "HDMI Out". Note that this jack is not ARC-
compatible.
Setup
• Settings are required to use the ARC function. Select "Yes" for "5. ARC Setup"
in Initial Setup (
• For detailed settings for TV connection, CEC function and audio output, refer
to the instruction manual of the TV.
(*) ARC function: This function transmits the audio signals of the TV via an
HDMI cable, and plays the audio of the TV on this unit. Connection to an ARC-
compatible TV is complete with one HDMI cable. To check if the TV supports the
ARC function, refer to the instruction manual of the TV, etc.
TV
60
Playback
≫
p156).
Front Panel≫ Rear Panel≫ Remote≫
Setup
≫ ≫
p148) on the remote