Pride Mobility Legend Classic 3-Wheel Scooter Owner's Manual page 35

X I . C A R E
STORAGE
See V. “Batteries and Charging.”
FUSE REPLACEMENT
In the event a fuse should cease to work:
n Remove the fuse by pulling it out of its slot.
n Examine the fuse to be sure it is blown. See figures 23 and 23A.
n Insert a new fuse of the proper rating.
FIGURE 23. WORKING FUSE
REAR LIGHTS
Light bulbs for the rear running lights and turn indicators are easily replaceable.
CAUTION! Do not use regular automotive-type 12-volt light bulbs; your scooter is equipped with a
24-volt electrical system.
NOTE: Replacement light bulbs can be purchased from your authorised Pride provider.
n Remove the light cover.
n Gently remove the bulb by pulling it straight out.
n Insert a new 24V, 5-watt bulb.
n Replace the light cover.
Legend Classic/Rev D/August 03
A N D M A I N T E N A N C E
FIGURE 23A. BLOWN FUSE (REPLACE)
www.pridemobility.com
35