Page 1
INSTALLATION INSTRUCTIONS FOR PART 95-8210 Toyota 4-Runner Limited 95-8210 KIT FEATURES • Double DIN Radio Provision • Stacked ISO Mount Units Provision KIT COMPONENTS A) Double Din Trim Plate • B) Double DIN Brackets Small Flat Blade Screwdriver/ Panel Removal Tool •...
Page 2
Final Assembly ......... . . 5 *Note: Refer also to the instructions included with the aftermarket radio. 95-8210 NOWLEDGE IS Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry.
Unsnap panel and pull away to gain access behind panel. (Figure C) Remove (1) 10 mm bolt on bottom left of center panel behind panel below steering column. ( (Figure D) 95-8210 DASH DISASSEMBL Y...
Page 4
Remove (2) 10 mm bolts beneath radio behind climate controls. (Figure G) Unsnap and remove entire center panel around radio. Remove (2) 10 mm bolts securing radio. Unplug and remove radio. (Figure H) Continue to final assembly. 95-8210 DASH DISASSEMBL Y...
Double DIN trim plate. (Figure B) Slide the Double DIN radio into the bracket/trim plate assembly and secure the radio to the assembly using the screws supplied with the radio. (Figure C) Continue to final assembly. 95-8210 KIT ASSEMBL Y...
Double DIN trim plate. (Figure B) Slide the stacked ISO mount units into the bracket/trim plate assembly and secure the units to the assembly using the screws supplied with the units. (Figure C) Continue to final assembly. 95-8210 KIT ASSEMBL Y...
*NOTE: When a Black wire is not present, ground radio to vehicle chassis. All colors may not be present on all leads due to manufacturer’s specifications. 95-8210 FINAL ASSEMBL Y (A) Strip wire ends back 1/2" B) Twist ends together...