Metra Electronics 99-6510 User Manual page 5

1. If vehicle has floor shifter, remove
shifter knob.
2. Remove center console inserts, if
present. (Figure A)
3. Remove screws securing the rear
center console to the floor panel.
Lift up on the rear center console
to clear the gearshift lever, if
present. (Figure B)
4. Remove screws securing the front
center console to the floor panel.
Unclip and remove the front center
console. (Figure C)
(Figure A)
Dash Disassembly 99-6510
Dodge Ram 1500
Ram 2500/3500 2006-2008
(Figure B)
(Figure C)
(with mini center console)/
5. Loosen two 8 mm screws at
bottom of dash. Unsnap lower
panel.
6. Remove (2) Phillips screws facing
up on front edge of radio/climate
control panel. (Figure D)
7. Unclip and remove entire panel
surrounding radio and climate
controls, including A/C vents.
(Figure E)
8. Remove (4) 7 mm screws securing
radio to dash and remove radio.
Continue to kit assembly
(Figure D)
(Figure E)