Omron CJ2H-CPU6*-EIP Series Connection Manual page 20

11
IP4 is displayed on the main
display.
Press the ZERO/SET Key.
The default value is displayed
on the sub-display.
Press the ZERO/SET Key.
The sub-display content
changes and you can change
the values.
Select a digit whose value you
want to change by pressing the
→ (RIGHT) or ← (LEFT) Key.
You can change the value of a
blinking digit.
Change the value by pressing
the ↑ (UP) or ↓ (DOWN) Key.
Change to 000002.
12
000002 is displayed on the
sub-display.
Press the ZERO/SET Key.
2 is displayed on the
sub-display.
*In this step, you set 2 that is the
fourth octet of IP address
192.168.250.2.
Press ZERORST/ESC Key
once. The first screen in step 11
is displayed again.
Press the ZERORST/ESC Key
once.
6. EtherNet/IP Connection Procedure
Press the ZERO/SET Key once.
Press the ZERO/SET Key once.
Press the → (RIGHT) or ← (LEFT) Key.
Press the ↑ (UP) or ↓ (DOWN) Key.
Press the ZERO/SET Key once.
Press the ZERORST/ESC Key once.
IP4 is displayed.
Press the ZERORST/ESC Key once.
17