Mounting The Access Point On A Pole - Cisco Aironet LAP1522 Hardware Installation Manual

Chapter 2 Mounting Instructions

Mounting the Access Point on a Pole

When installing an access point on a vertical pole, mast, or a streetlight pole, you should use the optional
Cisco pole mount kit. The kit supports metal, wood, or fiberglass poles from 2 to 16 inches in diameter.
Assembling the Pole Clamp Bracket and the Mounting Bracket
When installing an access point on a pole, mast, or a streetlight, you should use the optional Cisco pole
mount kit. The kit supports metal, wood, or fiberglass poles from 2 to 16 inches in diameter.
The pole mount kit contains several parts that you must assembled prior to mounting on a pole. First you
need to assemble two strap brackets on the pole clamp bracket that are positioned for the pole diameter
you are using to mount the access point.
on the pole clamp bracket.
OL-12632-03
Figure 2-9 illustrates the pole diameter indicators and bolt holes
Cisco Aironet 1520 Series Outdoor Mesh Access Point Hardware Installation Guide
Mounting the Access Point
2-21