Cisco Aironet LAP1522 Hardware Installation Manual page 53

Chapter 2 Mounting Instructions
To assemble the pole clamp bracket, perform these steps:
Position the strap brackets on the pole clamp bracket for the pole diameter you are using and secure each
Step 1
strap bracket with two M8 x16 bolts (with lock washers) (see
13 to 15 ft lbs (17.6 to 20.3 Nm).
Figure 2-10
1
M8 x1.25x16 bolts (with lock
washers)
2
Pole clamp bracket
OL-12632-03
Assembled Pole Clamp Bracket and Strap Brackets
Cisco Aironet 1520 Series Outdoor Mesh Access Point Hardware Installation Guide
Figure 2-10). Tighten the bolts to
3
Strap bracket
(shown positioned for 11 to 16 inch diameter pole)
Mounting the Access Point
2-23