Introduction; Unpacking The Hardware; Preparing The Mvme712M Module - Motorola MVME712M Installation And Use Manual

Introduction

This manual provides hardware preparation and installation
instructions for the MVME712M and P2 adapter board.

Unpacking the Hardware

Note
Unpack the equipment from the shipping carton. Refer to the
packing list and verify that all items are present. Save the packing
material for storing and reshipping of the equipment.
Avoid touching areas of integrated circuitry; static
!
discharge can damage circuits.
Caution

Preparing the MVME712M Module

The locations of the headers, LEDs, terminators, and connectors for
the MVME712M are shown in Figure 2-1. The module has been
factory tested and is shipped with factory-installed jumpers that
configure the MVME712M to provide the system functions
required for a VMEbus system.
2Preparing and Installing
If the carton is damaged upon receipt, request that
the carrier's agent be present during unpacking and
inspection of the equipment.
the Hardware
2
2-1