Table of Contents
Advertisement
Introduction
This manual provides general information, hardware preparation,
and installation instructions, for the MVME761EXT Transition
Module and the P2 Adapter board.
Product Overview
The MVME761EXT Transition Module expands the capability of
the MVME761 by providing additional standard I/O connections
when interfacing between the MVME260x, MVME360x, or
MVME460x VMEmodule and various peripheral devices.
Typically, the single slot MVME761EXT is installed next to the
MVME761. This MVME761EXT module provides industry
standard connectors to simplify customer cable requirements for
the SCSI, 8/16 bit Single Ended (SE) or Differential (DE), PMC I/O
and Ethernets (10M bps and 10/100BaseT) signals. Both the
MVME761 and the MVME761EXT interface to the same P2 Adapter
connected to the baseboard. The MVME761EXT can also connect to
other P2 Adapters.
Features
The features of the MVME761EXT Transition Module include:
1General Information
Industry-standard connectors for these interfaces:
– 10Base-T/100Base-TX Ethernet
– 10M bps Ethernet (AUI)
One PMC I/O port
8/16 bit single ended or differential SCSI
1
1-1
Advertisement
Table of Contents
