Table of Contents
Advertisement
ABOUT THIS GUIDE
Introduction
The SE955 Integration Guide provides general instructions for mounting and setting up the SE955-I100R,
SE955-I300R, SE955-E100R, SE955-I105R, and 955-E105R scan engines as well as instruction for replacing an
existing SE824, SE923, or SE1223WA scan engine with an SE955.
NOTE This guide provides general instructions for the installation of the scan engine into a customer's device. It
is recommended that an opto-mechanical engineer perform an opto-mechanical analysis prior to
integration.
Configurations
Available versions of the SE955 scan engine include:
•
SE955-I100R
•
SE955-I300R
•
SE955-E100R -
•
SE955-I105R
•
SE955-E105R -
Chapter Descriptions
Topics covered in this guide are as follows:
•
Chapter 1, Getting Started
the engine and decoder.
•
Chapter 2, Installation
positioning aspects.
•
Chapter 3, Replacing Existing Engines
SE955.
-
Class 2, 3.3v decoded engine; gold connector
-
Class 2, 3.3v decoded engine; alternative gold connector
Class 1, 3.3v decoded engine; gold connector
-
Class 2, 5.0v decoded engine; gold connector
Class 1, 5.0v decoded engine; gold connector
provides an overview, theory of operation, and power management information for
describes how to install the engine, and provides considerations for ESD, optical, and
provides information for replacing existing scan engines with the
Advertisement
Table of Contents
