Siemens SIMATIC HMI OP3 Equipment Manual page 102

System Messages
Message Cause
$ 040 No response from PLC
Cable defective or not plugged in
$ 041 Temporary driver error
$ 044 MPI transfer error
$ 045 No connection to PLC No. x
(message with variable )
$ 100 Invalid RAM contents
$ 104 Download mode aborted by operator in-
put (OP3 or ProTool/Lite)
$ 119 Automatic start by OP3
Password list is not necessarily deleted
$ 202 Error on reading date
$ 203 Error on reading time
$ 311 Flag x does not exist on PLC
$ 316 Current password level too low for requi-
$ 317 red operator input
$ 318 Login attempted with invalid password
$ 319 While editing the password, a password
was entered which already exists
$ 320 Superuser level cannot be modified; pass-
$ 321 word invalid
$ 322 Password too short
$ 324 The screen number you entered does not
exist
$ 340 When the status function is being execu-
ted on the PU, you cannot operate the
OP3
$ 401 Entered value does not match display for-
mat
$ 402 Operating error on STATUS VAR or
FORCE VAR screen
$ 403 Incorrect time input
B-4
Action
Check physical connection
Restart PC
Re-send configuration
Re-enter date
(return OP3 for repair)
Re-enter time
(return OP3 for repair)
Modify configuration (variable)
Login at higher password
level
Enter password before defining level
Password must have at least 3 characters
Operator Panel OP3
Edition 11/99