Table of Contents
Advertisement
Adjust belt tension by loosing the motor mounting plate
front bolts and rear bolt (see Fig. 68) and sliding the plate
towards the fan (to reduce tension) or away from the fan
(to increase tension). Ensure the blower shaft and motor
shaft are parallel to each other (pulleys aligned). Tighten
all bolts securely when finished.
MOUNTING
BOLTS (4)
Fig. 68 - - Belt Drive Motor Mounting
ECarrier Corporation 2018
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
BLOWER PULLEY
V-BELT
MOTOR
PULLEY
MOTOR
MOTOR MOUNTING
PLATE
C11504
Edition Date: 4/18
618
Pre- - Start and Start- - Up
This completes the mechanical installation of the unit.
Refer to the unit's Service Manual for detailed Pre- - Start
and Start- - Up instructions. Download the latest versions
from HVAC Partners (www.hvacpartners.com).
Printed in U.S.A.
66
—
Catalog No: 48LC ---7---05SI
Replaces: 48LC--- 7--- 04SI
Advertisement
Table of Contents
