Indicator
Name
Immobilizer System
Indicator
*1 : Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.
On/Blinking
Comes on briefly when you turn the
●
ignition switch to ON
*1
, then goes
(
w
off.
Comes on if the immobilizer system
●
cannot recognize the key information.
Explanation
Blinks -
●
Models without keyless access system
You cannot start the engine. Turn the
ignition switch to LOCK
0 , pull the
(
key out, and then insert the key and
turn it to ON
w again.
(
Models with keyless access system
You cannot start the engine. Set the
power mode to VEHICLE OFF (LOCK),
then select the ON mode again.
Repeatedly blinks - The system may
●
be malfunctioning. Have your vehicle
checked by a dealer.
Do not attempt to alter this system or
●
add other devices to it. Electrical
problems can occur.
uuIndicatorsu
Message
—
Continued
97