Front Fog Light Bulbs
When replacing, use the following bulbs.
Front Fog Light: 35 W (H8 LL for halogen bulb type)
Screw
Cover
Bulb
Coupler
Tab
* Not available on all models
*
1. Loosen the screw using a Phillips-head
screwdriver.
2. Remove the screw, then push up the under
cover.
3. Push the tab to remove the coupler.
4. Rotate the old bulb to the left to remove.
5. Insert a new bulb into the fog light
assembly and turn it to the right.
6. Insert the coupler into the connector of the
bulb.
uuReplacing Light BulbsuFront Fog Light Bulbs
1Front Fog Light Bulbs
*
NOTICE
Halogen bulbs get very hot when lit. Oil, perspiration,
or a scratch on the glass can cause the bulb to
overheat and shatter.
When replacing a halogen bulb, handle it by its
plastic case, and protect the glass from contact with
your skin or hard objects. If you touch the glass, clean
it with denatured alcohol and a clean cloth.
*
495