Light Switches - Honda JAZZ Owner's Manual

Light Switches

■
Manual Operation
High Beams
Flashing the high beams
Low Beams
Turns on position, tail, and rear
licence plate lights
Turns on headlights, position,
tail, and rear licence plate lights
*1 : Models with the keyless access system have an ENGINE START/STOP button instead of an ignition
switch.
Rotating the light switch turns the lights on
and off, regardless of the position of the
ignition switch *1 .
■
High beams
Push the lever forward until you hear a click.
■
Low beams
When in high beams, pull the lever back to
return to low beams.
■
Flashing the high beams
Pull the lever back, and release it.
uuOperating the Switches Around the Steering WheeluLight Switches
1Light Switches
Models without keyless access system
If you remove the key from the ignition switch while
the lights are on, a chime sounds when the driver's
door is opened.
Models with keyless access system
If you leave the power mode in VEHICLE OFF (LOCK)
while the lights are on, a chime sounds when the
driver's door is opened.
If you sense that the level of the headlights is
abnormal, have your vehicle inspected by a dealer.
Do not leave the lights on when the engine is off
because it will cause the battery to discharge.
Continued 167