Honda JAZZ Owner's Manual page 478

■
Resetting the Display
Reset the service reminder information display if you have performed the
maintenance service.
1. Turn the ignition switch to ON
2. Press the button until
then press the SEL/RESET button.
3. Press the button until Maintenance Info. appears on the display, then
press the SEL/RESET button.
4. Press the button and select the reset information on the display, then
press the SEL/RESET button.
u The service code will disappear.
To cancel the service reminder information reset mode, select Cancel, then press the
SEL/RESET button.
*1 : Models with the keyless access system have an ENGINE START/STOP button instead of an ignition
switch.
Button:
Changes the customize
menus and items.
SEL/RESET Button:
Enters the selected item.
( w *1 .
(customize settings) appears on the display,
uuService Reminder System
1Resetting the Display
NOTICE
Failure to reset the service reminder information after
a maintenance service results in the system showing
incorrect maintenance intervals, which can lead to
serious mechanical problems.
The dealer will reset the service reminder information
display after completing the required maintenance
service. If someone other than a dealer performs
maintenance service, reset the service reminder
information display yourself.
* u
477