1. System to Construct and Configuration Devices
1.1. System Configuration and Configuration Devices
This section describes the system configuration and configuration devices used in this Guide.
The following figure represents the system configuration.
Computer
Sysmac Studio, MATLAB/Simulink, and Simulink PLC Coder are installed.
EtherCAT communications
cable
USB cable
NJ-PA3001 Power Supply Unit
NJ301-1200 CPU Unit
R88M-K10030T
Servomotor
R88D-KN01L-ECT
Servo Drive
Node Address 1 (Axis 0)
9