Carry out the following steps for the macro operation (taking a closeup shot).
Note. Before macro operation, set the zoom limit ON/OFF select switch to "OFF." (refer to page 12)
a. Rotate the focus ring fully toward the infinity side.
b. While pulling the macro lever, rotate the macro ring clockwise as far as it goes.
c. Focus the lens by controlling the zoom.
Note. It is also possible to shoot an object while the macro ring is in an intermediate position.
In this case, the values of the M.O.D. (Minimum Object Distance) and the object area at M.O.D. are those
of between a normal and a closeup shot.
■ PROCEDURE TO CANCEL
Rotate the macro ring in the opposite direction of the arrow until the macro lever automatically returns to its
original position.
MACRO OPERATION
- 16 -
MACRO RING
MACRO LEVER