(5) Zoom Limit Operation
The zoom limit function can be used in the servo operation mode.
(The setting of the zoom limit positions can be set also in the manual operation mode.)
By using this function, the zoom movement toward both the tele side and the wide side can be confined;
therefore, zooming can be done within the desired shot angles.
Note. While the zoom limit function is being used, the preset function cannot be used.
ZOOM SEESAW CONTROL LEVER
Front View
ZOOM LIMIT ON/OFF SELECT SWITCH
Top View
- 12 -
ZOOM LIMIT SWITCH (T)
ZOOM LIMIT SWITCH (W)