Zoom Operation; Manual Operation - FujiFilm Fujinon UA13x4.5BEZD-T9 Operation Manual

ZOOM SEESAW CONTROL LEVER
QUICK FRAME / MANUAL SELECT KNOB
The zoom can be operated in the following five operation modes.
(1) Manual Operation ..................................................................................................................................................... 7
(2) QuickFrame Operation (operation by Zoom Seesaw Control Lever)................................................ 8
(3) QuikZoom Operation.............................................................................................................................................10
(4) Auto Cruising Zoom Operation.........................................................................................................................11
(5) Zoom Limit Operation...........................................................................................................................................12
For the operating instruction in each mode, refer to the description on each mode.
The remote control operation is also available with optional accessories.

(1) Manual Operation

a. Set the zoom servo/manual select knob to "M."
b. Rotate the zoom ring directly or using the zoom lever. Clockwise rotation of the zoom ring, viewed
from the camera side, moves the zoom to the wide side, and counterclockwise rotation to the tele side.
(When rotating the zoom ring directly, it is recommended to remove the zoom lever for smooth
operation. If you removed the zoom lever, install it on the zoom lever holder so as not to lose it.)

ZOOM OPERATION

＊: While the preset function is being used, these switches work as the preset switches.
- 7 -
ZOOM LIMIT SWITCH (W)*
ZOOM LIMIT SWITCH (T)*
ZOOM LEVER HOLDER
ZOOM LEVER
CONNECTOR FOR ZOOM CONTROL
ZOOM RING
Page