ZOOM SEESAW CONTROL LEVER
FOCUS SERVO/MANUAL SELECT KNOB
QUICKFRAME/MANUAL ZOOM SELECT KNOB
The preset operation can be performed in the following two operation modes.
(1) Zoom Preset Operation.......................................................................................................................................15
(2) Zoom and Focus Simultaneous Preset Operation....................................................................................15
For the operating instruction in each mode, refer to the description on each mode.
PRESET OPERATION
* : While the zoom limit function i being used, these switches work as the zoom limit switches.
CONNECTOR FOR ZOOM CONTROL
- 14 -
PRESET SWITCH (ON) *
PRESET SWITCH (MEMO) *
Page