Samsung VP-D60 Owner's Instruction Manual page 58

ENGLISH ENGLISH
RS-232C Data Transfer (VP-D60/D65 only)
Transferring Images to PC
- You can use the RS-232C transfer function in both CAMERA mode
and PLAYER mode.
In CAMERA mode
You can not transfer an image during Edit search mode and record-
ing mode or in PHOTO and GHOST mode.
In PLAYER mode
You can transfer a still image in PLAYBACK or STILL
mode only.
1. Connect the camcorder to the PC with the RS-232C cable.
2. Turn on the camcorder (CAMERA or PLAYER)
3. Execute the Photoland RS software.
4. Playback a recorded tape and press the
button on the position of the image that you want to
transfer to PC.
In CAMERA mode, choose the scene that you want to
transfer to PC.
5. Press the CAPTURE icon on the control panel to start
transfer.
- The Picture will be paused and the TRANSFERRING
Display will appear.
- If you want to cancel the transfer, press the
button on the camcorder or press the ESC key on the
PC.
- If you want to transfer a high resolution image in
CAMERA mode, select the FRAME mode in the
PHOTO MODE (see page 47), and select the Frame in
the VIEW MODE (in Image menu on the menu bar) or
press the Frame icon on the tool bar.
- If you get a broken image, select the FIELD from the image menu
on the menu bar or press the FIELD icon on the tool bar.
6. Save the transferred images using the Save menu in File menu on
the menu bar.
Reference - When the Photoland RS cannot find the proper
COM port, press the PORT (port detect) icon on
control panel.
58
PÞenos dat pomoc' RS-232C
PÞenos nahr‡vky do po‹'ta‹e
Ð Funkci pÞenosu pÞes RS-232C móìete pouì't jak v reìimu Camera,
tak v reìimu Player.
V reìimu Camera
Obraz nemóìete pÞen‡äet bžhem reìimu Edit search, nahr‡v‡n',
Photo a Ghost.
Port detect
(STILL)
CAPTURE
(Control panel)
(STOP)
(Menu bar)
Ð Jestliìe m‡te nekvalitn' obraz, vyberte funkci FIELD z obrazovŽho
menu nebo stisknžte ikonu FIELD v nab'dce n‡strojó.
6. Uloìte pÞenesenŽ z‡znamy pomoc' menu Save v nab'dce File.
Pozn‡mka
(pouze VP-D60/D65)
V reìimu Player
Ð Nehybnù obraz móìete pÞen‡äet pouze v reìimu
Playback nebo Still.
1. PÞipojte videokameru k po‹'ta‹i pomoc' RS-232C kabelu.
2. Zapnžte videokameru (Camera nebo Player).
3. Spuséte software Photoland RS.
4. PÞehr‡vejte nahranou videokazetu a v m'stž, kterŽ
chcete pÞenŽst do po‹'ta‹e stisknžte tla‹'tko
V reìimu Camera vyberte scŽnu, kterou chcete pÞenŽst
do po‹'ta‹e.
5. Stisknžte ikonu CAPTURE na ovl‡dac'm panelu a
pÞenos dat za‹ne.
Ð Obraz se zastav' a zobraz' se displej pÞenosu dat.
Ð Chcete-li zruäit pÞenos dat, stisknžte tla‹'tko
(STOP) na videokameÞe nebo tla‹'tko ESC na
po‹'ta‹i.
Ð Jestliìe chcete pÞenŽst obraz s vysokùm rozliäen'm v
reìimu Camera, vyberte reìim FRAME (Sn'mek) v
nab'dce PHOTO MODE (viz str. 47) a z nab'dky
VIEW MODE (v menu Image) vyberte Frame nebo
stisknžte Frame v nab'dce n‡strojó.
Ð Jestliìe Photoland RS nemóìe naj't odpov'daj'c'
COM port, stisknžte ikonu PORT na ovl‡dac'm
panelu.
CZECH
(STILL).