Maintenance; After Finishing A Recording; After Completing A Recording Session - Samsung VP D 130 Owner's Manual

Maintenance

After finishing a recording

At the end of a recording you must remove the power source.
When recording with a Lithium Ion Battery Pack, leaving the pack on the camcorder can reduce the life span
of the battery. Hence, it should be removed from the camcorder.

After completing a recording session

1. Slide the TAPE EJECT switch in the direction of the arrow.
Opening the cassette door ejects the tape automatically.
Please wait while the tape is completely ejected.
2. After removing the tape, close the door and store the camcorder in a dust free
environment.
Dust and other foreign materials can cause square-shaped noise or jerky
images.
3. Set the power switch to the OFF mode.
4. Disconnect the power source or remove the Lithium Ion Battery Pack.
When disconnecting a power supply, separate it in the reverse order as connecting it,
by referring to page 21.
Hold down the BATTERY RELEASE button and slide the battery pack in the direction of the arrow.
ENGLISH
1
2
REV
S.SHOW
FWD
DELETE
3 4
OFF
89