ZOOMING IN AND OUT
Use the zoom function for close-up or wide-angle recording. This camcorder
allows you to record using 52x optical power zoom, 65x Intelli-zoom and 2200x
digital zoom.
To zoom in
Slide the Zoom lever towards T (telephoto).
•
(Or press the Control button () on the LCD panel.)
To zoom out
Slide the Zoom lever towards W (wide-angle).
•
(Or press the Control button () on the LCD panel.)
You can zoom with the zoom lever or the Control (W/T) button on the LCD panel.
•
Zoom magnifi cation over 65x is done through digital image processing, and is
•
therefore called digital zoom. Digital zooming is possible up to 2200x.
Set "Zoom Type" to "Digital Zoom." ➥page 65
The minimum possible distance between the camcorder and subject while
•
maintaining sharp focus is about 1cm (about 0.39 inch) for wide-angle and
1m (about 39.4 inches) for telephoto.
Optical zoom preserves image quality, but during digital zoom the image
•
quality may suffer.
Fast zooming or zooming in subject at a far distance may produce slow
•
focusing. If this occurs, use "Manual Focus." ➥page 62
It is recommended to use Anti-Shake (OIS) with handheld recording if the
•
subject is zoomed in and enlarged.
Frequent use of the zoom function consumes more power.
•
Zooming during a recording may record operation sound of the zoom lever
•
or zoom button.
When using the zoom function, its speed can be decreased by slowly moving
•
the Zoom (W/T) lever. A fast moving increases the zoom speed. However, the
Zoom (W/T) button on the display cannot adjust the zoom speed.
OK
W: Recording wide area
(wide-angle)
T: Recording enlarged
image (telephoto)
W: Wide-angle
T: Telephoto
0:00:00 [475Min]
STBY
9999
English_45