Table of Contents
Advertisement
Recording
Symptom
When the screen is exposed to
direct sunlight during recording,
the screen turns red or black for an
instant.
During recording, the date/time
does not display.
The beep sound is not heard.
There is a time difference between
the point where you press the
Recordingstart/stop button and
the point where the recorded video
starts/stops.
The recording stops.
You cannot record a photo image.
Do not leave the camcorder with the LCD screen exposed to direct sunlight.
•
"Date/TimeDisplay" to on. ➥page 89
•
Set the "BeepSound" to "On."
•
The beep sound is temporally off while recording videos.
•
When the Audio/Video cable jack is connected to the camcorder, the beep
•
sound will automatically turn off.
On your camcorder, there may be a slight time delay between the point
•
when you press Recordingstart/stop button and the actual point where
the recorded video starts/stops. This is not an error.
The internal temperature of your camcorder is unusually high. Turn off your
•
camcorder and leave it for a while in a cool place.
Your camcorder is damp and moist inside (condensation). Turn off your
•
camcorder and leave it for about 1 hour in a cool place.
Set your camcorder to Record mode. ➥page 23
•
Release the lock on the write-protection tab of the memory card if set.
•
The storage media is full.
•
Use a new memory card or format the storage media. ➥page 85
Or remove unnecessary images. ➥page 72
Explanation/Solution
English_121
Advertisement
Table of Contents
