Table of Contents
Advertisement
troubleshooting
Adjusting the image during recording
Symptom
Focus does not adjust
automatically.
The image appears too bright or
flickering, or changes in color.
Playback on your camcorder
Symptom
Pressing the playback (Play/Pause)
button did not start playing.
The Skip or Search function does
not work properly.
Playback is interrupted unexpectedly.
You cannot hear sound when
playing a Time Lapse recording.
Photos stored on a storage media
are not displayed in the actual size.
Playback on other devices (TV, etc.)
Symptom
You cannot view the image or
hear the sound on the connected
device.
122_English
Set "Focus" to "Auto." ➥page 61
•
The recording conditions are not suitable for auto focus.
•
Adjust the focus manually. ➥page 61
The lens is dusty on the surface. Clear the lens and check the focus.
•
Recording is being made in a dark place. Increase the brightness in the place.
•
This occurs when recording images under a fluorescent lamp, sodium lamp, or
•
mercury lamp. Cancel "iSCENE" to minimise these phenomena. ➥page 54
Press the MODEbutton to set Video Play mode.
•
Image files recorded on another camcorder may not play on your camcorder.
•
Check out a memory card compatibility. ➥page 38
•
If the temperature inside the camcorder is too high, it cannot function properly.
•
Turn the camcorder off, wait for a few moments, and turn it on again.
•
Check if the AC adaptor or battery pack is properly connected and stable.
The Time Lapse REC function does not support sound. ➥page 66
•
Photos recorded on other devices may not appear at actual size.
•
This is not an error.
Connect the audio line of the Audio/Video cable jack to your camcorder and the
•
connected device (TV, DVD recorder, etc). (Red color- right, White color- left)
The Audio/Video cable jack is not connected properly. Make sure that the Audio/
•
Video cable jack is connected to the proper jack. ➥page 95
Explanation/Solution
Explanation/Solution
Explanation/Solution
Advertisement
Table of Contents
