Table of Contents
Advertisement
settings options
Demo
Demonstration automatically shows you the major features that are included with your camcorder so that you may use
them more easily.
settings
Disables the function
"Off"
Activates demonstration mode and shows various features on the LCD screen.
"On"
Using the Demo function
The Demo mode is canceled in the following cases:
•
-
If any button is operated (Recordingstart/stop,PHOTO,EASYQ, etc.)
However, the camcorder will enter the Demo mode automatically after 5 minutes in STBY mode if it is idle for
5 minutes without operation. If you don't want the Demo function to start, set "Demo"to"Off".
TheDemofunctiondoesnotoperateinthefollowingcases:
- If "AutoPowerOff" is set to "5Min"(uses the battery as main power), the Auto Power Off function will turn the
camcorder off before Demo can run.
Anynet+ (HDMI-CEC)
This camcorder supports Anynet+. Anynet+ is an AV network system that enables you to control all connected
Samsung AV devices with an Anynet+ supported Samsung TV remote control.
settings
Disables the function
"Off"
The Anynet+ function is enabled.
"On"
When you turn on the camcorder that is connected to an Anynet+ supporting TV with an HDMI cable, the TV
•
(Anynet+ supported) is automatically turned on. If you do not want to use this Anynet+ function, set the "Anynet+
(HDMI-CEC)" to"Off."
For details on the Anynet+ (HDMI-CEC) function, refer to the user manual of Samsung's Anynet+ supported TV.
•
94_English
contents
contents
on-screen
display
None
None
on-screen
display
None
None
Advertisement
Table of Contents
