"MANUAL", you need to manually change the channel. When you select "AUTO",
the radio automatically switches to the designated channel after 10 seconds without
user intervention.
Press the Menu/DSC control until the "MAIN MENU" screen appears.
Step 1
Step 2
Go to "DSC SETUP > AUTO CHANGE CH".
The following interface appears on the screen.
Select "MANUAL" or "AUTO".
Step 3
Press the Menu/DSC control to save the setting and return to the previous
Step 4
screen.
12.4 Individual Acknowledgement
This feature allows you to set the acknowledgement mode of individual call requests.
Step 1
Press the Menu/DSC control until the "MAIN MENU" screen appears.
Go to "DSC SETUP > INDIVIDUAL ACK".
Step 2
The "INDIVIDUAL ACK" interface appears on the screen.
Select "MANUAL" or "AUTO".
Step 3
MANUAL: Select the soft key, and then you need to send an
acknowledgement manually upon a call request.
AUTO: Select the soft key, and then the radio sends an
unacknowledged message upon a call request.
Press the Menu/DSC control to save the setting and return to the previous
Step 4
screen.
12.5 Position Acknowledgement
This feature allows you to set the acknowledgement mode of position request calls.
Press the Menu/DSC control until the "MAIN MENU" screen appears.
Step 1
Go to "DSC SETUP > POSITION ACK".
Step 2
The "POSITION ACK" interface appears on the screen.
Select "MANUAL", "AUTO", or "IGNORE".
Step 3
86