Key Beep; Gnss Setup; Entering The "Gnss Setup" Interface; Internal Gnss - Furuno FM-4800 Operator's Manual

10.3 Key Beep

This feature allows you to set the volume level of the beep that is emitted when a key
is pressed.
Press the Menu/DSC control until the "MAIN MENU" screen appears.
Step 1
Go to "GENERAL SETUP > KEY BEEP".
Step 2
The following interface appears on the screen.
Step 3 Select a level.
Press the Menu/DSC control to save the setting and return to the previous
Step 4
interface.

10.4 GNSS Setup

This section allows you to set how to show the time and the position information of
the vessel.
10.4.1

Entering the "GNSS SETUP" Interface

Press the Menu/DSC control until the "MAIN MENU" screen appears.
Step 1
Go to "GENERAL SETUP > GNSS SETUP".
Step 2
The following interface appears on the screen.
10.4.2

Internal GNSS

This feature allows you to set whether to show the position and time information
68