Adjusting The Lcd During Play; Controlling Sound From The Speaker - Samsung SCD107 Owner's Instruction Book

Basic Recording

Adjusting the LCD during PLAY

✤ You can adjust the LCD during playback.
✤ The adjustment method is the same procedure as used in CAMERA mode. (see page 32)

Controlling Sound from the Speaker

The Speaker works in PLAYER mode only.
I
When you use the LCD screen for playback, you can hear recorded sound from
the built-in Speaker.
- Follow the instructions below to decrease or mute speaker volume in the PLAYER mode.
- Take the following steps to lower the volume or mute the sound while playing a tape
on the camcorder.
1. Set the power switch to PLAYER mode.
2. Press (PLAY/STILL) to play the tape.
3. When you hear sounds once the tape is in play, use the MENU DIAL to adjust the volume.
I
A volume level display will appear on the LCD.
Levels may be adjusted from anywhere between 00 to 19.
I
If you close the LCD while playing, you will not hear sound from the speaker.
Notes
I
When the cable is connected to the Audio/Video jack, you cannot hear sound from the speaker
or adjust the volume.
I
If a cable is connected to the AV jack, you can hear sound from the speaker when
AV IN/OUT MODE on MENU is set to AV IN.
ENGLISH
2
3-1
VOL/MF
<3-2>
0 : 2 3 : 4 7
5 5 min
VOL. [ 1 1 ]
1 2 : 0 0 A M
J A N . 1 0 , 2 0 0 4
35 35