Connecting To A Tv Which Has No Audio And Video Input Jacks; Playback - Samsung SCD107 Owner's Instruction Book

Playback

Connecting to a TV which has no Audio and Video input jacks

✤ You can connect your camcorder to a TV through a VCR.
1. Connect the camcorder and VCR with the AUDIO/VIDEO cable.
I
The yellow plug : Video
I
The white plug : Audio(L) - Mono
I
The red plug : Audio(R)
2. Connect a TV to the VCR.
3. Set the power switch on the camcorder to PLAYER mode.
4. Turn on both the TV and VCR.
I
Set the input selector on the VCR to LINE.
I
Select the channel reserved for your VCR on the TV set.
5. Play the tape.
Playback
1. Connect a power source and set the power switch to PLAYER mode.
2. Insert the tape you wish to play back.
3. Using the (FF) and
4. Press the (PLAY/STILL) button.
I
The images you recorded will appear on the TV after a few seconds.
I
If a tape reaches its end while being played back, the tape will rewind automatically.
Note
I
The playback mode (SP/LP) is selected automatically.
(REW) buttons, find the first position you wish to play back.
ENGLISH
S-VIDEO VIDEO
AUDIO(L)
VCR
AUDIO(R)
Audio/Video
TV
S-VIDEO
CAMCORDER
ANTENNA
DV
IEEE
USB 1394
A/V
S-VIDEO
MIC
71 71