Sharp TQ-GX30E Service Manual page 81

STEP REMOVAL
4 Key PWB-B
5 SD/SIM FPC
PWB-G
6 BB Shield
Plate
Downloaded from www.Manualslib.com
CONFIDENTIAL
PROCEDURE
1.Jack Cover
2.Side Key
3.Hook..................... (D1)x7
4.Solder................... (D2)x1
5.Flat Cable............. (D3)x3
1.Hook..................... (E1)x1
2.Hook..................... (E2)x2
1.Hook..................... (F1)x1
manuals search engine
FIGURE
(D1) x 5
5
6
7
Key PWB-B
Jack Cover
(Hands Free)
Back Cabinet (Display) Assembly
To unhook the key PWB-B,
insert a small flat head screwdriver
and lever it up as illustrated.
BB Shield Case
BB Shield Case
Through the hole of BB shield case,
push up the center of BB shield plate and release the hook (F1).
Slide the BB shield plate to remove it.
3 – 5
SD/SIM FPC PWB-G/
BB Shield Case
(D3) x 1
(D2) x 1
(D1) x 2
Key PWB-B
Hook
Minus
Driver
Figure 5
SD/SIM FPC PWB-G
(E2) x 2
Through the hole of BB shield case,
(E1) x 1
push up the center of SD/SIM FPC PWB-G
and release the hook (E1).
Figure 6
BB Shield Plate
Slide
(F1) x 1
Figure 7
GX30
(D3) x 2
Side Keys