Installing The Drive - Fujitsu GRANPOWER500 TEAMSERVER Series User Manual

1 Installing the Drive

To install and use this product with the mainframe of the teamserver, see the User's Guide
included with the mainframe of teamserver series. Before installation, setting pins for SCSI
terminator, motor start mode, and SCSI-ID must be set.
Locations of Setting Pins
(Bottom view)
(Note) The product has no function for setting terminator.
(Side view)
Pin number : 121110 9 8 7 6 5 4 3 2 1
all open
SCSI ID
at shipment: #15
motor start mode
at shipment: off(open)
E
1