Samsung HMX-S10BN User Manual page 151

Wireless Network
Message
Connection failed. Time
expire.
Connection failed.
Initializing failed.
No devices found.
No Wi-Fi AP found.
File reception failed.
Invalid password.
Icon Informs that...
• WPS PBC button was
not pressed within 2
minutes, or WPS PIN
was not entered to AP.
-
• Failed to connect to
the Sender in Device to
Device mode within 2
minutes.
Camcorder's WLAN
- configuration does not
match to that of AP.
Failed to initialize DLNA
-
devices.
No renderer that can
be connected to the
-
camcorder is found in the
connected network.
No available AP is
found around you or the
-
camcorder's WLAN is not
functioning properly.
Device on the other end
- is turned off or network
connection has problem.
In Device to Device mode,
- the Receiver's and Sender'
s password do not match.
Action
• Try again and press WPS button
or enter the WPS PIN within 2
minutes.
• Configure the IP settings (auto
or manual) of your camcorder to
match the AP's.
• Reset DLNA devices and try
again.
• Use Refresh button to search for
the renderer.
• Check your network connection.
• Check whether an AP is available
near you.
• If an available AP does exist and
the problem persists, contact
Samsung Service Center.
• Check if recipient's device is
turned on.
• Check if network connection
works properly and try again.
• Correctly enter the password
sent by Sender in Receiver
screen.
141