Demonstration - Samsung CZECH Owner's Instruction Manual

ENGLISH
Advanced Recording
G DEMONSTRATION
✤ Demonstration automatically shows you the major functions
that are included with your camcorder so that you may use
them more easily.
✤ The DEMONSTRATION function may only be used in the
CAMERA mode without a tape inserted in the camcorder.
✤ The demonstration operates repeatedly until the
DEMONSTRATION mode switched OFF.
1. Set the camcorder to CAMERA mode.
2. Press the MENU button.
I
The menu list will appear.
3. Move the MENU SELECTOR to highlight INITIAL
and push the MENU SELECTOR.
4. Select DEMONSTRATION from the submenu and
push the MENU SELECTOR.
5. To activate the DEMONSTRATION,
set DEMONSTRATION ON.
I
Press the menu button to quit the menu.
I
The demonstration will begin.
6. To end the DEMONSTRATION,
set the DEMONSTRATION to OFF.
Notes
I
The DEMONSTRATION function only works without a
TAPE installed.
I
The DEMONSTRATION mode is automatically activated when
the camcorder is left idle for more than 10 minutes after switching
to the CAMERA mode (no tape is inserted in the camcorder).
I
If you press other buttons (FADE, BLC, PHOTO, EASY) during
the DEMONSTRATION mode, the DEMONSTRATION stops
temporarily and resumes 10 minutes later if you do not operate
any other functions.
I
While setting the NIGHT CAPTURE to ON, the DEMONSTRATION
function does not work.
G
✤
✤
✤
CAM MODE
INITIAL CLOCK SET
CAMERA WL. REMOTE
A/V
LANGUAGE
MEMORY
DEMO
VIEWER
CAM MODE
INITIAL SET
CLOCK SET
WL.REMOTE
LANGUAGE ENGLISH

DEMONSTRATION

I
I
I
I
I
I
I
CZECH
43 43