Audio Dubbing; Dubbing Sound - Samsung CZECH Owner's Instruction Manual

ENGLISH
Advanced Recording

Audio dubbing

✤ The AUDIO DUBBING function only works in PLAYER Mode.
✤ You can add sound to the original sound on a pre-recorded tape, recorded in
SP mode with 12bit sound.
✤ Use the internal and external microphones or other audio equipment.
✤ The original sound will not be erased.

Dubbing sound

1. Set the camcorder to PLAYER mode.
I
If you want to use an external microphone,
connect the microphone to the external MIC input
jack on the camcorder.
I
When you wish to dub using the External A/V
input, connect the Multi-AV cable to the camcorder
by inserting the Multi-AV cable into the
Multi-AV Jack at the rear of the camcorder.
(VP-D323i/D325i/D327i only)
- Press the MENU button, move the MENU
SELECTOR to highlight A/V and push the
MENU SELECTOR.
- Move the MENU SELECTOR to highlight AV
IN/OUT and push the MENU SELECTOR to
select AV IN.
2. Press the (PLAY/STILL) button and find the time
frame of the scene to be dubbed.
3. Press the (PLAY/STILL) button to pause the
scene.
4. Press the A.DUB button on the Remote Control.
I
A.DUB will be displayed on the LCD.
I
The camcorder is in a ready-to-dub state for
dubbing.
5. Press the (PLAY/STILL) button to start
dubbing.
I
Press the (STOP) button to stop the
dubbing.
Notes
I
You can not use the audio dubbing function while playing a write protected
video tape.
I
When you wish to dub using the External A/V input, you must connect the
Multi-AV cable to the audio system from which you wish to record.
(VP-D323i/D325i/D327i only)
I
You can not dub sound on a pre-recorded tape in LP mode or 16 bit mode.
✤
✤
✤
✤
Dabování zvuku.
Audio (L)Audio (R)
AV IN
(VP-D323i/D325i/D327i only)
I
I
I
I
I
I
I
I
CZECH
65 65