We also recommend that you install the Plantronics software located at plantronics.com/ software. With it installed you can: • Customize your headset and USB adapter settings to your personal preferences •...
Plantronics Hub for Windows and Mac (plantronics.com/software) to enable headset control (answer/end and mute) functionality. NOTE Plantronics Hub software also allows you to customize your headset's behavior through advanced settings and options. TIP Your headset senses when you change the microphone boom from one side to the other and syncs the audio and controls specific to each side.
Your headset can pair with up to 8 devices but only maintain 2 connections simultaneously; this includes the Bluetooth USB adapter. Some softphones require the installation of Plantronics Hub for Windows and Mac to enable Load Software headset control (answer/end and mute) functionality.
Page 4
• Take off/put on your headset while on an active call (requires active smart sensors) * Plantronics Hub for Windows and Mac required (plantronics.com/software) If you have muted an active call and you start to speak, then a desktop notification reminds you Mute on reminder* that you are on mute.
Disable sensors You can disable your headset smart sensors several ways: • Manage sensors through Plantronics Hub software • Hold both the Mute and Call buttons for more than 4 seconds until the LED flashes purple then red. Repeat to reactivate; the LED flashes purple then blue.