HHB PORTADRIVE PDR2000 Operation Manual page 61

Pressing 2-CH RETURN (F6) will display this screen:
The 2-CHANNEL RETURN is a separate stereo line input on the side of the PORTADRIVE that can be
used to feed stereo signals into the PORTADRIVE's stereo L/R tracks or used purely as a method for
monitoring a return feed, say from a camera.
The page shows the level control for this stereo input as well as simple metering. To set the level for
the 2-CHANNEL RETURN, move the cursor to the level value field below the fader and use the DATA
wheel to set a value.
The options are:
2 CH RET OFF or ON. Simple as that! Setting to OFF will help to reduce power consumption.
LIMITER It is possible to apply limiting to the 2-CHANNEL RETURN input. The options are OFF
or GANGED (because it is a stereo input, the 'on' option for the limiter is automatically
GANGED in stereo).
SENSITIVITY You can set the operating level for the 2-CHANNEL RETURN input. The options are
HIGH (-10dB) or LOW (+4dB).
Version 1.31
TOP PANEL MODES
53