HHB PORTADRIVE PDR2000 Operation Manual page 38

FRONT PANEL MODES
Pressing the OUTPUT key again will show this screen:
Here you can set the AUX outputs' input source, enable or disable MS decoding and set the master
level. The options are exactly the same as for the MAIN outputs.
(*) When both the MAIN and AUX input sources' are set to OFF, the output path electronics are turned
off thus saving power. As such, if you are not using both the MAIN and AUX outputs, switching both
sources to OFF will conserve battery life.
When this page is displayed, the meters show the AUX output level in the L/R columns and if
'FOLLOW METERS' mode is selected, the headphones carry a copy of the AUX outputs.
Pressing the OUTPUT key again will show this screen:
It is possible to select INPUTS, TRACKS or OFF as the input source for the output mixer - if either
INPUTS or TRACKS are selected, further functions are available on extra pages as follows.
When INPUTS is selected as the output mixer's source, the following screens are available:
30 Version 1.31