HHB PORTADRIVE PDR2000 Operation Manual page 47

RECORDING THE NEXT TAKE INTO A NEW SLATE
In the EDIT INFO page, use rotary encoder 4 to select the take number that is followed by '[NEXT]'.
In the example above, the next take to be recorded is take 4 of slate B270AA.
Press SOLO2 to access the SLATE EDIT page
Let's assume that we want to change the next take to be recorded from B270AA, take 4 to B270AB,
take 1.
Rotate rotary encoder 1 (SHIFT) to shift the cursor to the position of the character you want to change.
Rotate clockwise to shift right and anti-clockwise to shift left.
The default starting position of the cursor is always the right-most character as it is this one that is
most frequently going to be changed.
Rotate rotary encoder 2 (CHARA) to change the character in the selected cursor position. In this
example, rotate it 1 step clockwise to change from 'A' to 'B'.
If you need to enter a number, rotary encoder 3 (<0-9>) can be used as a shortcut to numeric
characters. Also, if necessary, use SOLO4 to delete a character.
Press SOLO6 to SAVE. The LCD will save and return to the EDIT INFO page which will now display
the edited take i.e. SLATE: B270AB
Instigating record will make take 001 of slate B270AB current and so the [NEXT] indicator will vanish.
Note - If you make a mistake in your edit, you can ABORT using the SOLO5 button – in this
case the LCD will return to the EDIT INFO page without saving any changes.
Version 1.31
TAKE:001[NEXT].
FRONT PANEL MODES
39