Table of Contents
Advertisement
LCD Error Messages
Display
DOCUMENT JAM
ADD CARTRIDGE
LINE ERROR
LOAD DOCUMENT
MEMORY FULL
NO ANSWER
NO. NOT
ASSIGNED
REMOVE PAPER JAM
THEN PRESS STOP
Meaning
The loaded document has
jammed in the feeder.
The print cartridge is not
installed.
Your unit cannot connect with
the remote machine, or has
lost contact because of a
problem on the phone line.
You have attempted to set up
a sending operation with no
document loaded.
The memory is full.
The remote machine has not
answered after all the redial
attempts.
The one-touch or speed dial
location you tried to use has no
number assigned to it.
Recording paper has run out,
or has jammed.
Solution
Clear the document jam.
Install the print cartridges.
See page 1.15.
Try again. If failure persists,
wait an hour or so for the line
to clear, then try again.
Or, turn the ECM mode on. See
'Setting User-Selectable System
Options' on page 4.34.
Load a document and try again.
Either delete unnecessary
documents, or retransmit after
more memory becomes
available, or split the
transmission into more than
one operation.
Try again. Make sure the
remote machine is operational.
Dial the number manually with
the keypad, or assign a number.
Clear the jam or load paper in
the tray, then press Stop.
Troubleshooting
7.7
Advertisement
Table of Contents
