Fuser Area - Samsung SCX-5115 User Manual

8.6
T
ROUBLESHOOTING

Fuser Area

If the paper jammed in the fuser area, "PAPER JAM 1" appears
on the display:
N : The fuser area is hot. Take care when removing paper
OTE
from the machine.
1
Lift the release lever to open the side cover.
2
Pull down on the fuser lever as shown below.
This will release pressure on the paper.
If paper is not seen in this area, skip to the Exit Area.
N : Do not pull paper up through the fusing unit. Unfused
OTE
toner may adhere in the area, resulting in smudged copies.
3
Remove the jammed paper, in the direction shown.