Installing Driver Over The Network - Samsung SCX-465 Series User Manual

Installing driver over the network

• Some features and optional goods may not be available depending on
model or country (see "Features by models" on page 7).
• The machine that does not support the network interface, it will not be
able to use this feature (see "Rear view" on page 24).
6
Windows
Make sure that the machine is connected to the network and powered
1
on. Also, your machine's IP address should have been set (see "Setting IP
address" on page 136).
2 Insert the supplied software CD into your CD-ROM drive.
If the installation window does not appear, click Start > All programs >
Accessories > Run.
X:\Setup.exe replacing "X" with the letter, which represents your CD-
ROM drive and click OK.
Review and accept the installation agreements in the installation
3
window. Then, click Next.
Select Network connection on the Printer Connection Type screen.
4
Then, click Next.
5 Follow the instructions in the installation window.
Silent installation Mode
Silent installation mode is an installation method that does not require any user
intervention. Once you start the installation, the machine driver and software
are automatically installed on you computer. You can start the silent installation
by typing /s or /S in the command window.
Command-line Parameters
Following table shows commands that can be used in the command window.
Following command-line are effective and operated when command is
used with /s or /S. But /h, /H or /? are exceptional commands that can be
operated solely.
Command- line Definition
/s or Starts silent installation.
/S
Description
Installs machine drivers
without prompting any UIs
or user intervention.
2. Using a Network-Connected Machine
139