Chapter 4. Web Management; Web Main Page - Planet Networking & Communication IMG-120T User Manual

The Industrial Modbus Gateway provides Web interface for management function configuration which makes the
Industrial Modbus Gateway operate more effectively. It can be configured through the various web browser tools.
A network administrator can manage and monitor the Industrial Modbus Gateway from the local LAN. This
section indicates how to configure the Industrial Modbus Gateway to enable its management to function.

4.1 Web Main Page

After a successful login and the web main screen appears, the web main screen displays the overview
information of Industrial Modbus Gateway. The web main screen in Figure 4-1 appears.
As listed on the left side of the web main screen, the configurable management functions are shown below:

Overview

Network Settings-

Serial Settings

Modbus Settings

CHAPTER 4. WEB MANAGEMENT

Figure 4-1: Web Main Screen
Display the basic settings information and network information of Industrial
Modbus Gateway.
Set up the IP address of the Industrial Modbus Gateway.
COM Settings: configure serial port parameters as shown below:
Basic Settings (Alias/ Baud Rate/ Data Bits/ Stop Bits/Parity Bits/ Flow
Control).
Advance Settings (RTS control/DTR control).
COM Information: display serial port settings related information.
Modbus Parameters: configure Modbus parameters as shown below:
Basic Settings (Modbus Settings, Response Timeout & Interval Timeout)
-43-
User's Manual of IMG-120T