Removing Excess Humidity - Samsung ACH1800E Owner's Instructions Manual

Removing Excess Humidity

24
E-
If the atmosphere in your room is very humid or damp, you can remove
excess humidity without lowering the room temperature too much.
1 If necessary, press (ON/OFF) button.
Result: The On/Off indicator on the unit comes on.
The air conditioner runs in the mode selected when
the unit was last used.
The indoor unit beeps.
IMPORTANT
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
Plugged in
Stopped
lt will start up normally after three minutes.
2
To select the DRY mode, press the Mode button until
at the top of the wireless remote controller.
Result: The indoor unit beeps.
The air conditioner runs in DRY mode.
You can change modes at any time.
N N N N o o o o t t t t e e e e
3
To adjust the temperature, press the Temperature buttons one or more
times until the required temperature is displayed. Possible temperatures
O
are between 18 C and 30
Result: Each time you press Temperature buttons:
- The temperature is adjusted by 1
- The indoor unit beeps.
The air conditioner starts removing the excess humidity.
The quantity of air is adjusted automatically.
N N o o t t e e In the dry mode, the fan speed is controlled automatically.
N N o o t t e e
4 To control the direction of the air flow, refer to page 25.
O
C inclusive.
O
C.
is displayed