Install The Device; Rack-Mount - Cisco NCS 540 Hardware Installation Manual

Install the Device

Before you begin this task, ensure that you have read and understood the safety warnings in the
Warning Statements
Installing the Cisco NCS 540 involves these tasks:
•
•
•
•
•
•
•
•
•
•

Rack-Mount

The device is shipped with rack mounting brackets that are to be secured on the sides of the device.
Caution If the rack is on wheels, ensure that the brakes are engaged or the rack is otherwise stabilized.
Table 3: Cisco NCS 540 Router Rack-Mount Kit
Quantity
2
8
2
3
2
section of the
Rack-Mount, on page 21
Ground the Device, on page 23
Install the AC Power Cables, on page 24
Install the DC Power Cables, on page 25
Port Connection Guidelines , on page 26
Connect to the Console Port, on page 27
Connect to the Management Ethernet Port, on page 29
Install and Remove Transceiver Modules, on page 30
Connect Interface Ports, on page 38
Maintain Transceivers and Optical Cables, on page 39
Part Description
Rack-mount brackets
M4 x 0.7 x 6-mm Phillips flat-head screws
M3 x 0.5 x 4-mm Phillips countersink screws
Top cover or the NEBs kit is an optional accessory to improve the air flow, hence it may not be a part
of your standard package.
C H A P T E R
Safety Warnings handout topic.
Cisco NCS 540 Router Hardware Installation Guide
4
Standard
21