Prepare Your Location - Cisco NCS 540 Hardware Installation Manual

Prepare for Installation
• Ratcheting torque screwdriver with a Phillips head that exerts up to 30-pound force per square inch
• Crimping tool as specified by the ground lug manufacturer
• Wire-stripping tools for stripping both 6 and 14-AWG wires
• Tape measure and level
• Ratcheting torque screwdriver with a Phillips head that exerts up to 15 inch-pounds (1.69 newton meters)

Prepare Your Location

This section illustrates how the building that houses the chassis must be properly grounded to the earth ground.
Figure 2: Building with Rack Room Connected to Earth Ground
(0.02-kilograms force per square millimeter (kgf/mm2)) of pressure.
of torque for attaching the ground wire to the device.
Cisco NCS 540 Router Hardware Installation Guide

Prepare Your Location

17